Skip to content
Pure MissionPools
Arizona pool framed by palm trees and Camelback Mountain in Scottsdale
Strip the scale, stains, and years of buildup back to bare plaster.

Pool Acid Wash & Drain-and-Clean

East Valley water is hard, and every season of evaporation and refilling concentrates more calcium into your plaster, leaving it rough, gray, and scaled. Monsoon dust and years of organic buildup add to it. An acid wash strips that layer back down to clean, bare surface — a full drain, a diluted acid rinse, neutralization, and a careful refill with proper startup chemistry so your plaster isn't just clean, it's protected going forward.

Free custom quote
The details

What's included

Every item below happens on every visit, whether it's your first appointment or your fiftieth.

Close-up of clean, balanced blue pool water

Every visit includes

  • Full drain and wastewater disposal
  • Diluted acid wash of plaster and tile line (or straight drain-and-clean if acid isn't needed)
  • Neutralization pass before refill
  • Pressure rinse and debris removal
  • Refill and full startup chemistry
  • Equipment and surface inspection during drain-down

Removes calcium scale and staining that brushing and chemicals can't touch

Brightens dull, gray plaster back toward its original color

Full drain lets us inspect surface, tile, and equipment we never see underwater

Proper acid-to-water dilution and neutralization protects your plaster from over-etching

How it works

Getting started is simple

No pushy sales, no complicated onboarding, just a clear process from first call to clear water.

01

Evaluate the surface

Not every dull pool needs acid — we check whether staining is scale (needs acid), organic (often a chlorine wash instead), or just needs a drain-and-clean. We tell you which one your pool actually needs.

02

Drain & wash

We drain the pool, then wash the plaster and tile line with a properly diluted acid solution (or a chlorine wash for organic staining), working section by section.

03

Neutralize, refill & start up

The surface is neutralized and rinsed before refill, then we run full startup chemistry so your water is balanced from day one, not fighting scale again in a week.

Questions

Frequently asked questions

Straight answers about acid wash.

How often does a pool actually need an acid wash?
Most East Valley pools go 3–5 years between acid washes, sometimes longer with a good weekly chemistry program. It's worth doing sooner if your total dissolved solids (TDS) are climbing, calcium scale has visibly set into the plaster, or staining hasn't responded to a chlorine wash or brushing.
Is a drain-and-clean the same as an acid wash?
No, and we won't sell you the stronger job if you don't need it. A drain-and-clean is a full drain with a thorough pressure wash and debris removal — no acid. An acid wash goes a step further, using a diluted acid solution to strip calcium scale and set-in staining that washing alone won't remove. We evaluate your surface and recommend the lightest process that gets real results.
What does an acid wash or drain-and-clean cost?
It depends on your pool's size, plaster condition, and how much scale or staining has built up, so we don't publish a flat rate. Run our instant quote tool for a fast estimate, and we'll confirm exact pricing with a free on-site evaluation before any work starts.
Where we work

Acid Wash across the East Valley

We bring acid wash to Queen Creek and the surrounding communities — pick your city for local details.

Let's get started

Ready for acid wash?

Free water analysis, chemicals included. Get your free quote in about a minute.

CallTextFree Quote